HC9C GLOCK 17/19/26 COMPENSATOR

The Herrington Arms HC9C 3.0 Glock Micro Compensator was our first comp design when the company started in 2018 and helped create the brand and company that we know today. When this comp was designed, its purpose was to be used by customers who wanted to give their Glock a "Roland Special" look and feel. While the Roland Special is not as popular as it used to be, this comp has still held its value amongst our line up of Glock compensators. The HC9C will work with the stock springs provided your gun has gone through our recommended break in period of 500 rounds factory new ammunition is used with the threaded barrel you intend to use with the firearm before installing a compensator. When testing this compensator, we have data showing it mitigating 29% muzzle flip reduction depending on what 9mm load and Glock model is used. 

 

 

Material : 7075 Aluminum

Finish : Black Anodized or FDE Cerakote

Compatibility : Glock 17/19/26/45/34/19x (including the MOS models of) with 1/2-28 Barrels and must be GEN 2-5 Glocks, Ruger RXM, Shadow Systems MR - DR - XR series, Zev Tech OZ9, Lonewolf Arms Timberwolf and Dusk series, Polymer 80, and most other Glock clones. 

Included : 5/64 Allen key - Steel replacement 6-32 set screw (short set and a long set)

Length : .96" long

Holster Compatibility : Will fit in most open bottom holsters. We use Sierra Defense, Tier 1 Concealed, and Safariland.

 

*Blems are cosmetic ONLY. They will function as normal - May have nicks, dings, pitting, machining marks, chips, discoloration, etc.

- DOES NOT WORK WITH KKM OR BARSTO BARRELS!

AMMO DISCLAIMER: We DO NOT recommend using plated, bi-metal, or frangible ammo in ANY of our compensators. Doing so will void the warranty and we will not cover or replace the comp if there are any damages.

 

INSTALLATION INSTRUCTIONS

- Make sure all threads are clean of grease, carbon, and loctite. Wipe the threads down till they're clean. If the threads are not cleaned, the loctite will not set properly.

- Only use loctite 243 on the barrel AND set screw threads. Some versions of the blue Loctite are not very strong and will not hold up. Feel free to use a generous amount.

- Torque the set screws to no more than 18in/lbs for 8-32 set screws and no more than 11in/lbs for 6-32 set screws. 

- Allow the loctite to set for 24-48 hours before using.

- Please be sure that the compensator is not touching the slide, frame, or guide rod as that can cause cycling issues.

 

 

 

Herrington Arms HC9C Micro Compensator Review & Testing Video

DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.