Announcement IconFREE SHIPPING ON ORDERS OVER $199
Item #:
HCMDG
availability:
in stock

HCMDG PSA MICRO DAGGER COMPENSATOR

$74.99 - $99.99
Selected Color is
Adding to cart… The item has been added

*Free shipping is only available when full cart value exceed’s $199

The Herrington Arms HCMDG is designed to fit the Palmetto State Armory Micro Dagger Series. We engineered the comp with side fins so it has a seamless design with the slide. The HCMDG will work with the stock springs provided your gun has gone through our recommended break in period of 500 rounds factory new ammunition is used with the threaded barrel you intend to use with the firearm before installing a compensator. When testing this compensator, we have data showing it mitigating 29.5% muzzle flip reduction depending on what 9mm load and model used. 
 

Specifications

Material : 7075 Aluminum

Finish : Black Anodize, FDE Cerakote, Sniper Green Cerakote, and Sniper Grey Cerakote

Compatibility : PSA Micro Dagger with 1/2-28 threaded barrel

Included : 1/16th Allen Key - Steel Replacement 6-32 set screws

Length : .93" long

Holster Compatibility : Will fit in most open bottom holsters. We use Sierra Defense, Tier 1 Concealed, and Safariland.

 

Highlights

  • Blems are cosmetic ONLY. They will function as normal - May have nicks, dings, pitting, machining marks, chips, discoloration, etc.
  • DOES NOT WORK WITH KKM OR BARSTO BARRELS
  • DOES NOT FIT: X1 OR C1 SLIDES

AMMO DISCLAIMER: We DO NOT recommend using plated, bi-metal, or frangible ammo in ANY of our compensators. Doing so will void the warranty and we will not cover or replace the comp if there are any damages.

 

INSTALLATION INSTRUCTIONS

  • Make sure all threads are clean of grease, carbon, and loctite. Wipe the threads down till they're clean. If the threads are not cleaned, the loctite will not set properly.
  • Only use loctite 243 on the barrel AND set screw threads. Some versions of the blue Loctite are not very strong and will not hold up. Feel free to use a generous amount.
  • Torque the set screws to no more than 18in/lbs for 8-32 set screws and no more than 11in/lbs for 6-32 set screws. 
  • Allow the loctite to set for 24-48 hours before using.
  • Please be sure that the compensator is not touching the slide, frame, or guide rod as that can cause cycling issues.