Every compensator we manufacture has undergone rigorous reliability testing!
Every product we make goes through a week long design process and multiple versions before we machine a prototype!
We currently machine all of our compensators on 2 brand new Doosan DNM4500S CNC milling machines and a 2019 Tormach 1000mx CNC milling machine!
The answer is easy! All you need to do is purchase the threaded barrel that matches your slide. For example, if you have a carry length slide you need a carry length threaded barrel (4.6"). If you have an X compact slide you need a X compact threaded barrel (4.3"). This will allow you to run a longer frame and give you an integrated look.
Yes they do. We have run tens of thousand of rounds through all of our models and have had zero malfunctions. If you are having an issue with a build, it is likely the case you have installed our prodcut incoretly or your handgun needs broken in. Compensators need a smooth running system to be reliable. A new handgun has tolerances that need to be worn in before we suggest adding a compensator
-It's easy! We designed our comps to be self-timing so all you have to do is
- Remove your slide from you frame
- Remove your guide rod assembly
- Apply Loctite to barrel threads
- Thread comp onto barrel until it stops
- Back off a 1/8 turn
- Apply Loctite to set screws
- Tighten down set screws
Overall great product. Fitment was nice with the Xmacro frame on an XL slide. Very noticeable difference in this comp compared to the xmacro built in comp or other comps on the market. This one is by far my favorite one.
After installing and 50 rounds at the range And never dealing with a Comp I was amazed how quick I was back on target. Impressive finish and detail to the product. Will be purchasing another!
Figured I'd try this out on my 365 with the macro frame. Overall I'm extremely impressed! Put 200 rounds of 115 ball and 124 hp.. no issues at all, and really tames the muzzle flip. Shout to Cory as well for squaring me away when I ordered the wrong item!
HC 365 Compensator for my First Generation Sig P365
I recently purchase, installed, and used in the field, the HC365 compensator for my 1st generation Sig 365, which has iron sites and no red-dot. The compensator is well made. It was easy to install following advice from several YouTube videos so that I wouldn't mess it up as to alignment, distance from barrel, and tightness to apply. I also used a very small dab of blue "LockTite" to help retain it in position, in case needed. In the field, I certainly noticed a positive difference in reduced timing to bring the firearm again on-target, for the 2nd and further shots. Yes, I recommend this compensator.
Functioned great in ~100 round break in. Definitely felt about %20 recoil reduction. Looking forward to putting more rounds through it and seeing how it holds up.