Announcement IconFREE SHIPPING ON ORDERS OVER $199
Item #:
HC509-BL
availability:
in stock

HC509 COMPENSATOR FOR FN 509

$89.99
Selected Color is

*Free shipping is only available when full cart value exceed’s $199

The Herrington Arms H509 Compensator is designed to work with the FN509 series. It is made of high-quality 7075 aluminum and coated with either FDE Cerakote or Black Anodized finish to compliment your specific Echelon configuration. The HCEC will work with the stock springs provided your gun has gone through our recommended break in period of 500 rounds factory new ammunition is used with the threaded barrel you intend to use with the firearm before installing a compensator. Fits on 1/2-28 threaded barrels and most aftermarket barrels.

 
Specifications

Material : 7075 Aluminum

Finish : Black Anodized or FDE Cerakote

Compatibility : FN509 Full Size, Mid-size, and Compact with 1/2-28 threaded barrels

Included : 5/64 Allen key - Steel replacement 8-32 set screw

Length : .87 in long

Holster Compatibility : Will fit in most open bottom holsters. We use Sierra Defense, Tier 1 Concealed, and Safariland.

 

Highlights

  • NOT COMPATIBLE WITH BAR-STO, KKM, OR EFK BARRELS!
  • Works with 9mm models 
  • The HC509 Compensator passed our 4000-round testing sequence without any issues
  • WE RECCOMEND SURPASSING THE 500 ROUND BREAK IN BEFORE INSTALLING THE COMP
  • Blems are cosmetic ONLY. They will function as normal - May have nicks, dings, pitting, machining marks, chips, discoloration, etc. 

AMMO DISCLAIMER: We DO NOT recommend using plated, bi-metal, or frangible ammo in ANY of our compensators. Doing so will void the warranty and we will not cover or replace the comp if there are any damages.

 

INSTALLATION INSTRUCTIONS

  • Make sure all threads are clean of grease, carbon, and loctite. Wipe the threads down till they're clean. If the threads are not cleaned, the loctite will not set properly.
  • Only use loctite 243 on the barrel AND set screw threads. Some versions of the blue Loctite are not very strong and will not hold up. Feel free to use a generous amount.
  • Torque the set screws to no more than 18in/lbs for 8-32 set screws and no more than 11in/lbs for 6-32 set screws. 
  • Allow the loctite to set for 24-48 hours before using.
  • Please be sure that the compensator is not touching the slide, frame, or guide rod as that can cause cycling issues.