Announcement IconFREE SHIPPING ON ORDERS OVER $199
Item #:
HC320R-BL
availability:
in stock

HC320R COMPENSATOR FOR FLUX RAIDER

$99.99
Selected Color is
Adding to cart… The item has been added

*Free shipping is only available when full cart value exceed’s $199

Material: 7075 Aluminum

Finish: FDE Cerakote or Black anodize finish

Compatibility: Full size P320’s, P320 XCompact, P320 Compact, P320 XCarry with 1/2-28 threaded barrels

Included: 5/64 Allen key, Steel replacement 8-32

The Herrington Arms HC320R Compensator is designed to work with the Sig Sauer P320 combined with the Flux Defense Raider chassis; It is made of high-quality 7075 aluminum and coated with either FDE Cerakote or a Black anodized finish to compliment your specific Sig P320 configuration. The 320R will work with the stock springs provided your gun has gone through our recommended break in period of 500 rounds factory new ammunition is used with the threaded barrel you intend to use with the firearm.
 

Highlights

  • This compensator will make your x carry 3.9" slide flush with the end of the Raider chassis!
  • We recommend using our HA 3.9in Guide Rod or DPM Guide Rod
  • Uses Steel replacement 8-32 set screws
  • REQUIRES A THREADED BARREL
  • 1.6" inches in length
  • NOT COMPATABLE WITH BAR-STO, KKM, OR EFK BARRELS!
  • Works with most Sig P320 9mm models 
  • With Legion models it may require a DPM spring kit to run 115 grain ammo!

IF YOU HAVE AN ISSUE ASSEMBLYING WITH THE NEW P320 GUIDE ROD THAT HAS THE GOLD WASHER ON THE END, PLEASE SEND US AN EMAIL. WE HAVE A TECHNIQUE TO HELP ASSEMBLY. 

*Blems are cosmetic ONLY. They will function as normal. May have nicks, dings, pitting, machining marks, chips, discoloration, etc.

Installation Instructions

- Make sure all threads are clean of grease, carbon, and loctite. Wipe the threads down till they're clean. If the threads are not cleaned, the loctite will not set properly.

- Only use loctite 243 on the barrel AND set screw threads. Some versions of the blue Loctite are not very strong and will not hold up. Feel free to use a generous amount.

- Torque the set screws to no more than 18in/lbs for 8-32 set screws and no more than 11in/lbs for 6-32 set screws. 

- Allow the loctite to set for 24-48 hours before using.

Please be sure that the compensator is not touching the slide, frame, or guide rod as that can cause cycling issues.

 

The difference between the HC320R and HC320XL

The HC320R is 3/8" longer than the HC320XL and has larger top ports to reduce more recoil and sit flush with the end of the Raider chassis.  We designed the HC320R specifically for the guys running the Flux Defense Raider Chassis (FLUX RAIDER (Brace) — FLUX Defense).