HC3652P COMPENSATOR FOR SIG P365/P365XL

Regular price$89.99
/
Shipping calculated at checkout.

Color
Quality
  • In stock, ready to ship
  • Inventory on the way
NOTIFY ME WHEN IN STOCK

The Herrington Arms HC3652P two port Compensator has been expressly created to fit and work with Sig Sauer's popular P365 series of handguns. 

Herrington Arms have specifically engineered it to prevent a common issue known as vertical climb. When you shoot your P365, it will flip upwards, and it will take you a second or two to re-align the sites to your target.

Why Should You Compensate Your Weapon? 

Compensators are practical accessories that enable your weapon to perform better than it ever did before. A properly compensated handgun won't 'jump' as much in your hand as a non-compensated one.

You will be able to re-acquire and engage your target faster, and you will become a much more accurate shooter.  This has a lot to do with how your body perceives felt recoil.

The laws of physics being what they are, it is not possible to eliminate recoil. However ‘felt recoil’ can be directed away from the body. This is what a compensator does very well. It has been equipped with porting holes on top. When you discharge your firearm, the propellant and its hot gases propel the projectile towards your target. Since the Sig P365 operates based on the time-tested locked breech, tilt barrel mechanism, its barrel also tilts upwards.

The HC3652P Compensator

Here, your HC365 Compensator truly comes into its own. Its ports have been meticulously designed to enable the gases to escape upwards. This will push the weapon downwards, even as its mechanism tilts it upwards. The two forces cancel each other out. The result is an extremely stable weapon.  It is also a great way to enjoy a day at the range without any fear of flinching.

Flinching occurs when the body anticipates recoil and shies away from it by flinching or jerking the hand backward. This spoils the shooter's aim and creates a bad habit that is very difficult to overcome. In time, flinching caused by excessive muzzle climb takes the joy away from shooting sports. However, your Herrington Arms HC3652P Compensator will take care of this issue permanently.

It works perfectly well with stock springs so you won’t need to change anything on your carry weapon. The HC3652P will easily fit on all 1/2-28 threaded barrels for the P365X, P365XL, and P365 model pistols.

Key features of the HC3652P Compensator

  • Designed to reduce vertical recoil of your carry weapon
  • Makes target re-acquisition much easier with faster follow-up shots
  • Made from light and durable 6061 aluminum
  • Can be installed within minutes without the help of a gunsmith
  • DOES NOT WORK WITH KKM OR BARSTO BARRELS!
  • REQUIRES A THREADED BARREL
  • Lifetime warranty -no questions asked!

Products Specifications

  • Material: 6061 Aluminum
  • Length: 1.08" long
  • Compatibility: P365x, P365xl, and P365 SIG pistols
  • Comes with a 1/16 Allen key and durable steel replacement 6-32 set screws

 The SIG P365 series of pistols proudly carry the Sig Sauer name. As with all SIG products, the SIG P365 series is extremely reliable and accurate. Your SIG HC3652P compensator is the ultimate accessory that will help you shoot your SIGP365 faster and more accurately than you have ever shot before.

Reliability

Every compensator we manufacture has undergone rigorous reliability testing!

The design phase

Every product we make goes through a week long design process and multiple versions before we machine a prototype!

CNC Machining

We currently machine all of our compensators on 2 brand new Doosan DNM4500S CNC milling machines and a 2019 Tormach 1000mx CNC milling machine!

FAQs

The answer is easy! All you need to do is purchase the threaded barrel that matches your slide. For example, if you have a carry length slide you need a carry length threaded barrel (4.6"). If you have an X compact slide you need a X compact threaded barrel (4.3"). This will allow you to run a longer frame and give you an integrated look.

320 COMP INTEGRATION VIDEO LINK

Yes they do. We have run tens of thousand of rounds through all of our models and have had zero malfunctions. If you are having an issue with a build, it is likely the case you have installed our prodcut incoretly or your handgun needs broken in. Compensators need a smooth running system to be reliable. A new handgun has tolerances that need to be worn in before we suggest adding a compensator

-It's easy! We designed our comps to be self-timing so all you have to do is

- Remove your slide from you frame

- Remove your guide rod assembly

- Apply Loctite to barrel threads

- Thread comp onto barrel until it stops

- Back off a 1/8 turn

- Apply Loctite to set screws

- Tighten down set screws

INSTALL VIDEO ON YOUTUBE LINK

You may also like


Recently viewed

Customer Reviews
5.0 Based on 17 Reviews
5 ★
100% 
17
4 ★
0% 
0
3 ★
0% 
0
2 ★
0% 
0
1 ★
0% 
0
Write a Review

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
MG
02/09/2024
Matt G.
United States

Works great!

It was great, combine with a true Precision Barrel it Shrunk the group size in half and follow-up and Speedy follow upshots were noticeably better period very happy with purchase

DH
02/02/2024
Daniel H.
United States United States

Excellent Comp

I've been using the HC3652P for a while now. It has performed well with my gun. I do also run it with a DPM kit with the short spring. I did have an internal baffle strike after about 2200 rounds, but Herrington Arms warrantied it for me ASAP. Incredible service and product. New replacement arrived within 3 days and I'm absolutely satisfied. The replacement has been running flawlessly, so far have 275 rounds shot through it.

DB
01/11/2024
Dustin B.
United States United States

Perfect for Custom X Macro

Fast shipping. Easy installation. Perfect felt recoil. I swapped slides from p365 OG and xl base. The OG macro slide on the xl base has beautiful recoil and I loved it… until I put the Herrington Arms comp on the micro slide and slapped it on the x macro frame. Smoothest shooting I’ve experienced thus far. Side by side the custom x macro with the Herrington comp wins by far. The difference between the recoil from the micro 365 and the Herrington comped x macro is almost unreal how the snappy..ness? Went away. Great product! Thank you!

PA
08/31/2023
Paul A.
United States United States

Beautiful

Slapped this on a 365 with a 365xl barrel expecting there to be that slight gap between the slide and comp but the comp makes it sit flush with no malfunctions after 500rds. For those that claim the comp throws off the shot placement… I’m starting to believe they just need more training because after 500rds it hasn’t affected it at all. I’ve actually been on a dime when I matched this with the 365XL barrel and I’ve never been this proficient with any other compact gun. Noticeable reduction in muzzle rise but you’ll definitely need to dap a bit of loctite on it or it’ll fly off but that should be common knowledge. Overall great addition, I’ll keep it on my EDC until my form 4 gets approved

KD
08/11/2023
Kevin D.
United States United States

Notable difference

I noticed a considerable difference in muzzle flip from the first shot. Piece of cake to install, just be cautious with the tiny screws, and use loctite.

Endless
possibilities.

Personalize your handgun

The best products in the business

at the best prices