The Herrington Arms HC10 Compensator is designed to work with the CZ P10 series. It is made of high-quality 7075 aluminum and coated with either FDE Cerakote or Black Anodized finish to compliment your specific P10 configuration. The HCPDP will work with the stock springs provided your gun has gone through the recommended break in period of 500 rounds factory new ammunition with the threaded barrel you intend to use with the firearm before installing a compensator. Fits on 1/2-28 threaded barrels and most aftermarket barrels.
Specifications
Material: 7075 Aluminum
Finish: Black Anodized or Cerakote Finish
Compatibility: CZ P-10 with 0.75" or less of barrel protrusion, Killer Innovations and Primary Machine are some aftermarket threaded barrels that will work.
WILL work: CZP10C, P10F and SR Series with 0.75" or less of barrel protrusion. (if it is not listed here, it will not work)
WILL NOT work: CZ P-09, P0-7, CZ75 series, CZ Shadow series.
Included: 5/64 Allen key, Steel replacement 8-32 set screws
Highlights
- Reduces vertical and horizontal recoil
- 7075 Aluminum brings longevity, reliability and lightness in one package
- Easy to install, no gunsmith is required!
- REQUIRES A THREADED BARREL
- DOES NOT FIT THE NEW P10 SR with more than 0.75" of barrel protrusion!!
- DOES NOT WORK WITH KKM OR BARSTO BARRELS!
AMMO DISCLAIMER: We DO NOT recommend using plated, bi-metal, or frangible ammo in ANY of our compensators. Doing so will void the warranty and we will not cover or replace the comp if there are any damages.
INSTALLATION INSTRUCTIONS
- Make sure all threads are clean of grease, carbon, and loctite. Wipe the threads down till they're clean. If the threads are not cleaned, the loctite will not set properly.
- Only use loctite 243 on the barrel AND set screw threads. Some versions of the blue Loctite are not very strong and will not hold up. Feel free to use a generous amount.
- Torque the set screws to no more than 18in/lbs for 8-32 set screws and no more than 11in/lbs for 6-32 set screws.
- Allow the loctite to set for 24-48 hours before using.
- Please be sure that the compensator is not touching the slide, frame, or guide rod as that can cause cycling issues.