The Herrington Arms HCGX4 Compensator is designed to work with Taurus GX4 series. It is made of high-quality 7075 aluminum and coated with either FDE Cerakote, Sniper Green Cerakote, or Black Anodized finish to compliment your specific GX4 configuration. The HCGX4 will work with the stock springs provided your gun has gone through our recommended break in period of 500 rounds factory new ammunition is used with the threaded barrel you intend to use with the firearm before installing a compensator. Fits on 1/2-28 factory threaded barrels and most aftermarket barrels.
Specifications
Material: 7075 Aluminum
Finish: FDE Cerakote, Sniper Green Cerakote, and Black Anodize finish
Compatibility: Any Taurus GX4 OR GX4 Carry with a 1/2-28 threaded barrel
Included: 1/16 Allen key, Steel replacement 6-32 set screws
Length: 1.05 "
Holster Compatibility : Will fit in most open bottom holsters. We use Sierra Defense, Tier 1 Concealed, and Safariland.
Highlights
- Engineered to greatly reduce vertical AND horizontal recoil of your gun
- REQUIRES A THREADED BARREL
- Works with ONLY Taurus GX4 AND GX4 CARRY 9mm models
- Blems are cosmetic ONLY. They will function as normal
INSTALLATION INSTRUCTIONS
- Make sure all threads are clean of grease, carbon, and loctite. Wipe the threads down till they're clean. If the threads are not cleaned, the loctite will not set properly.
- Only use loctite 243 on the barrel AND set screw threads. Some versions of the blue Loctite are not very strong and will not hold up. Feel free to use a generous amount.
- Torque the set screws to no more than 18in/lbs for 8-32 set screws and no more than 11in/lbs for 6-32 set screws.
- Allow the loctite to set for 24-48 hours before using.
- Please be sure that the compensator is not touching the slide, frame, or guide rod as that can cause cycling issues.
