Announcement IconFREE SHIPPING ON ORDERS OVER $199
Item #:
HCMETE-BL
availability:
in stock

HCMETE COMPENSATOR FOR CANIK METE SF & SFT

$89.99
Selected Color is
Adding to cart… The item has been added

*Free shipping is only available when full cart value exceed’s $199

The Herrington Arms HCMETE Compensator is designed to work with the Canik Mete SF or SFT. It is made of high-quality 7075 aluminum and coated with either FDE Cerakote or Black Anodized finish to compliment your specific METE configuration. The HCMETE will work with the stock springs provided your gun has gone through SURPASSING the break in period of 500 rounds factory new ammunition with the threaded barrel you intend to use with the firearm before installing a compensator. Fits on 1/2-28 threaded barrels and most aftermarket barrels.

 
Specifications

Material : 7075 Aluminum

Finish : Black Anodized or FDE Cerakote

Compatibility : 

    • WILL fit the following: Mete SF (perfect fit) Mete SFT (will have slight gap in the fins due to slide contour differences), SFT Pro (will have slight gap in the fins due to slide contour differences)
    • WILL NOT fit the following: MC9 Series, TTI Combat, TP9 Series

Included : 6 O-Rings and Comp

Length : .9in long

Holster Compatibility : Will fit in most open bottom holsters. We use Sierra Defense, Tier 1 Concealed, and Safariland.

 

Highlights

  • 3 port design to mitigate vertical and felt recoil
  • Passed our 4000-round testing sequence without any issues
  • WE RECCOMEND SURPASSING THE 500 ROUND BREAK IN BEFORE INSTALLING THE COMP
  • Blems are cosmetic ONLY. They will function as normal
  • NOT COMPATIBLE WITH BAR-STO, KKM, OR EFK BARRELS!
  • Works with 9mm models 
  • Blems are cosmetic ONLY. They will function as normal - May have nicks, dings, pitting, machining marks, chips, discoloration, etc. 

AMMO DISCLAIMER: We DO NOT recommend using plated, bi-metal, or frangible ammo in ANY of our compensators. Doing so will void the warranty and we will not cover or replace the comp if there are any damages.

 

INSTALLATION INSTRUCTIONS

  • Make sure all threads are clean of grease, carbon, and loctite. Wipe the threads down till they're clean. If the threads are not cleaned, the loctite will not set properly.
  • Only use loctite 243 on the barrel AND set screw threads. Some versions of the blue Loctite are not very strong and will not hold up. Feel free to use a generous amount.
  • Torque the set screws to no more than 18in/lbs for 8-32 set screws and no more than 11in/lbs for 6-32 set screws. 
  • Allow the loctite to set for 24-48 hours before using.
  • Please be sure that the compensator is not touching the slide, frame, or guide rod as that can cause cycling issues.